学习geogebra中文手册中的一个作品

qzws100

我基本按手册上制作过程,完成了一个作品,其中对z滑杆的设置很重要.
学完手册后有如下感想:
1、手册中一些代数输入法与实际操作有出入，如:轴对称应是reflect[A,c],而手册中却是mirror[A,c];
角平分线的输入应是：anglebisector[A,B,C],而手册中却是angularbisector[A,B,C],具体应用时会出错.建议高手们能共同对geogebra中的许多代数输入命令深入挖掘，当然制作出教程明晰代数输入命令那是最好不过了.
2、geogebra制作动态显示效果需要有一定的编程基础,我猜可能功能会比几何画板强在一些.
3、动态文字显示设置上，字体种类和字号大小很有限，不知道是不是和我的机子有关.
本人的一点拙见，请高手们不吝赐教

lxzhang

在http://www.geogebra.org/en/wiki/ ... _Notes_GeoGebra_3.2中已经过上文提到的问题有详细的说明。下面附所有的改名命令

Renamed Commands
■AngularBisector[] was renamed to AngleBisector[]
■Diameter[] was renamed to ConjugateDiameter[]
■Eccentricity[] was renamed to LinearEccentricity[]
■FirstAxis[] was renamed to MajorAxis[]
■FirstAxisLength[] was renamed to SemiMajorAxisLength[]
■LineBisector[] was renamed to PerpendicularBisector[]
■Perpendicular[] was renamed to PerpendicularLine[]
■SecondAxis[] was renamed to MinorAxis[]
■SecondAxisLength[] was renamed to SemiMinorAxisLength[]
■UK English: Extremum[] was renamed to TurningPoint[]